Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
| Latest | 0 Rplys |
|
Show Printable Version | Email this Page | Subscribe to this Thread |
|
Thread Tools |
02-19-2015, 09:10 AM | #1 | |
AF Newbie
Join Date: Feb 2015
Location: waverly, Virginia
Posts: 5
Thanks: 1
Thanked 0 Times in 0 Posts
|
factory keyless entry for 1991and1995 caprice
Okay guys i have a 1991 and a 1995 caprice that i want to put factory keyless entry. I have factory keyless entry modules and wiring from 1993 and 1994 buick roadmasters. So my questions are will they work together? And how do i wire them with no diagrams/color code? Any information/help is needed thanks.
|
|
02-19-2015, 01:25 PM | #2 | |
AF Fanatic
Join Date: Jul 2011
Location: Worcester, Massachusetts
Posts: 5,017
Thanks: 70
Thanked 618 Times in 610 Posts
|
Re: factory keyless entry for 1991and1995 caprice
I wouldn't think that you would need any wiring.......normally, he harness is there......if it doesn't have keyless, the connector is usually there with no module attached.....
It's possible your Caprice ALREADY HAS KEYLESS IN THEM, you just don't have the fobs......did you check the SPID labels in the vehicles, to see if they have the keyless option? I am not sure of what the keyless option code would be though..... Here are some codes I found....AU0, AU8, AX3 are possibilities...see if they are on your SPID labels.... AU0 : LOCK CONTROL, REMOTE ENTRY – KEYLESS ENTRY (DOMESTIC) AU1 : LOCK CONTROL, SIDE DR, FUEL FILLER DR, ELEC AU2 : LOCK CONTROL, CARGO DR AU3 : LOCK CONTROL, SIDE DR, ELEC AU4 : LOCK CONTROL, SIDE DR, ELEC, AUTOMATIC AU5 : LOCK CONTROL, REMOTE ENTRY, SPECIFIC FREQUENCY AU6 : LOCK CONTROL, END GATE WINDOW, REM CONT ELEC AU8 : REMOTE FUNCTION ACTUATION, SPECIFIC FREQUENCY AV2 : SEAT, FRONT BUCKET, DRIVER, RECL, 8 WAY ADJUSTER AV3 : HOOK, CARGO TIE DOWN AV4 : SEAT, FRONT BUCKET, HIGH BACK, LESS TRIM AV5 : SEAT, FRT BKT, HIGH BACK AV7 : SEAT FRT SPLIT, SD/SO AW2 : ADJUSTER, SEAT, MANUAL, 6 WAY, DRIVER AW3 : ADJUSTER, SEAT, MANUAL, 6 WAY, PASS AW4 : DOOR, SLIDING SIDE EXTENSION AW5 : SEAT, FRONT BUCKET, LOW BACK, DRIVER & PASSENGER AW9 : LOCK CONTROL, QUARTER STOW L L/CPMT AX3 : LOCK CONTROL, KEYLESS ENTRY SYSTEM AX4 : RESTRAINT, CONVERSION SEAT, MAN, EUROPEAN |
|
The Following User Says Thank You to Tech II For This Useful Post: |
1995caprice804 (02-23-2015)
|
02-22-2015, 08:36 PM | #3 | |
AF Newbie
Thread starter
Join Date: Feb 2015
Location: waverly, Virginia
Posts: 5
Thanks: 1
Thanked 0 Times in 0 Posts
|
Re: factory keyless entry for 1991and1995 caprice
Would i be able to get that info from a chevy dealer from my vin number maybe because someone painted over the spid label.
|
|
02-22-2015, 09:19 PM | #4 | |
AF Newbie
Thread starter
Join Date: Feb 2015
Location: waverly, Virginia
Posts: 5
Thanks: 1
Thanked 0 Times in 0 Posts
|
Re: factory keyless entry for 1991and1995 caprice
Theres a spid in the trunk. They dont come with keyless.so can i wire the factory keyless from the roadmasters in my two caprices?
|
|
02-23-2015, 12:59 PM | #5 | |
AF Fanatic
Join Date: Jul 2011
Location: Worcester, Massachusetts
Posts: 5,017
Thanks: 70
Thanked 618 Times in 610 Posts
|
Re: factory keyless entry for 1991and1995 caprice
Your best bet, would be to go to a Chevy dealership, and get the manual.....copy pages of the wiring diagrams for the keyless entry....also the manual will give you the specific location(with pictures and words) of where the harness connectors are and where the module would be located.......
GM is kind of redundant, when it comes to wiring harnesses......so they would use the same harness, whether the vehicle had keyless entry or not.....it just wouldn't have the module.....so all you should have to do is attach the module to the existing harness connectors.....the only question is, do those module work for a specific year.....a chevy parts department should be able to tell you, by looking at the numbers on your module.....also make sure you have the correct key fob numbers, that correlate to the modules....a lot of fobs look alike......but it's the P/N on the back that determines if it will work with a certain model year..... |
|
05-09-2015, 06:46 PM | #6 | ||
AF Fanatic
Join Date: Oct 2007
Location: EVERETT, Massachusetts
Posts: 10,898
Thanks: 8
Thanked 432 Times in 431 Posts
|
Re: factory keyless entry for 1991and1995 caprice
Quote:
|
||
05-13-2015, 08:23 PM | #7 | ||
AF Newbie
Thread starter
Join Date: Feb 2015
Location: waverly, Virginia
Posts: 5
Thanks: 1
Thanked 0 Times in 0 Posts
|
Re: factory keyless entry for 1991and1995 caprice
Quote:
I have two keyless modules one from a 1993 and 1994 roadmaster but idk if either will work in my 1995 caprice 5.7 that is none keyless i sold the 91 |
||
|
POST REPLY TO THIS THREAD |
|
|