Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
| Latest | 0 Rplys |
|
Machine Tools Learn about metal lathes, milling machines and CNC tools. |
Show Printable Version | Email this Page | Subscribe to this Thread |
|
Thread Tools |
01-13-2009, 07:38 AM | #1 | |
AF Regular
Join Date: Jul 2003
Location: Lynchburg, Virginia
Posts: 410
Thanks: 0
Thanked 0 Times in 0 Posts
|
Oil a new lathe
When I get the lathe and I'm getting everything together I am planning to oil the parts as I go.
Should I just use regular engine oil to do this? I have searched through this and several other forums but would like more input. It's great to know I can come here and get advice! Thanks for the help. Chris
__________________
My personal site |
|
01-13-2009, 09:35 PM | #2 | |
Image Hosting Exceeded
Join Date: May 2003
Location: Flying in circles
Posts: 4,233
Thanks: 23
Thanked 95 Times in 86 Posts
|
Re: Oil a new lathe
Sure, motor oil will work fine. But for my gear, I find that sewing machine oil is a very practical option. It works as well as anything else, and the small bottle is terrific. I even use it for cutting fluid. You'll be very surprised how long a little bottle will last you (years!).
__________________
PHOTOBUCKET SUCKS |
|
01-16-2009, 12:08 PM | #4 | |
AF Enthusiast
|
Re: Oil a new lathe
Big engine lathes use "way" oil which is dispensed in an automatic or manual oiling system. It can be applied by the oil can method.
If this is a new lathe and a home shop table top type, the manufacturer should specify what to use. Sewing machine oil will probably do the job, or 3 in 1 oil which is a bit heavier. Bob |
|
01-16-2009, 08:38 PM | #5 | |
AF Enthusiast
Join Date: Jul 2005
Location: London
Posts: 899
Thanks: 3
Thanked 11 Times in 10 Posts
|
Re: Oil a new lathe
Shell Helix Ultra full synthetic.
Looks after my Elise at 8,000 rpm and works really well on the lathe too. |
|
|
POST REPLY TO THIS THREAD |
|
|