Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
| Latest | 0 Rplys |
|
Show Printable Version | Email this Page | Subscribe to this Thread |
|
Thread Tools |
02-27-2003, 06:38 PM | #1 | |
AF Newbie
Join Date: Feb 2003
Posts: 4
Thanks: 0
Thanked 0 Times in 0 Posts
|
remote programming instructions?
Does anybody know how to program remote for 95 q45? One day both my remotes stopped working. It was a very cold day, may be that's why.
Please help out... |
|
03-05-2003, 09:50 AM | #2 | |
AF Regular
Join Date: Aug 2002
Posts: 155
Thanks: 0
Thanked 0 Times in 0 Posts
|
Batteries?
Have you replaced the batteries? Usually available at Home Depot check-out lines.
Reprogram Key Fob J30, 1994-1996 Q45, 1994-1996 G20 To reprogram (enter new ID) key fob (keyless remote controller) follow the steps. 1. Close all doors and lock all doors 2. From the door switch unlock the trunk. 3. Insert and remove the key from the ignition key cylinder six times within 10 seconds. Note: -Key should be withdrawn from ignition key cylinder completely each time. -At this time, the new ID code is entered and original (previous) ID codes are erased. 4. Manually unlock and lock the driver side door 5. Push any button on the new remote controller once. If there is only one remote controller skip step 6. 6. Additional ID code entry: -Repeat step 4 and 5 7. END. Note: -If you need to activate more than two additional new remote controllers, repeat the procedure on step 6 "Additional ID code entry" for each new remote controller. Entry of maximum four ID codes is allowed and any attempt to enter more will be ignored.
__________________
Brian 1995 Q45 & Q45t 2000 Q45 |
|
09-01-2004, 02:08 AM | #3 | |
Banned
Join Date: Dec 2002
Posts: 103
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: remote programming instructions?
|
|
09-14-2004, 04:15 PM | #4 | ||
AF Regular
Join Date: Aug 2002
Posts: 155
Thanks: 0
Thanked 0 Times in 0 Posts
|
Do not pay for this!
Quote:
__________________
Brian 1995 Q45 & Q45t 2000 Q45 |
||
|
POST REPLY TO THIS THREAD |
Thread Tools | |
|
|