20 pieces End Mill set, 2 and 4 Flute - for sale -

[Decs0105]

First of all, I am not quite sure if it is ok to open a thread with the only purpose to sell something but since the machining section does not have a "classified thread" I hope it is ok, otherwise please let me know!

Ok I have a brand new "20 pieces End Mill set, 2 and 4 Flute" for sale. I only used one end mill and made only one cut with it.


The 3/16" through 7/16" end mills have a 3/8" shank.
The 1/2" and 9/16" end mills have a 1/2" shank.
The 5/8" and 11/16" end mills have a 5/8" shank.
The 3/4" end mill has a 3/4" shank.

The reason I am selling the set is quite simple, they do not fit to my "metric" Collets.

And before I put them up on e-Bay or something else I figured someone here might be interested.

The price will be 50$ + shipping (insured europe 20$ or uninsured US $20) for exact prices or any questions please pm me.

[Decs0105]

Originally Posted by iklan81

mm.....I am interested in. But, in my country, it sale around $30. But I am not sure if the tool has same specification or not.

Where are you from?

It is the same set as this https://www.littlemachineshop.com/pr...244&category=9, center cutting, TiN coated...

I offer them at a lower price as I paid for them, so it is not like I will make a profit from the sale and since they are new and never used I thought 50$ might be a good deal since I haven't seen them cheaper anywhere (ok one e-Bay seller lists them at $49,99 ) obviously the shipping costs will probably make the deal unattractive for US-buyers (insured shipping costs about $45 , in case someone is interested in that) but I hope someone from europe might want the set...

PS.: Such set (although metric) costs about 100$ here in europe...

[MPWR]

Originally Posted by Decs0105

First of all, I am not quite sure if it is ok to open a thread with the only purpose to sell something but since the machining section does not have a "classified thread" I hope it is ok, otherwise please let me know!

Not a problem. If we have need for it, we'll start a classified thread here. Meanwhile, unauthorised vending and advertising is as ever prohibited, but selling between members (like in the car modeling classsified thread) is fine.