 |
 |
 |
|
|
 |
| Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
 | | ||
| |
|
| Latest | 0 Rplys |
|
|||||||
 |
 Show Printable Version |  Email this Page | 
Subscribe to this Thread
|
|
|
Thread Tools |
07-31-2018, 11:03 AM
|
#1 | |
|
AF Newbie
Join Date: Aug 2007
Location: Richland, Missouri
Posts: 41
Thanks: 0
Thanked 0 Times in 0 Posts
|
95 GMC K3500 4wd front inner wheel bearing grease
The ball joints got loose on my diesel 1 ton dually dump bed, so I took it apart to put in new. I noticed the inner seals are worn so will put new ones in. I wonder if its a good idea to inject some new grease into the bearing and if so is there a special kind or will any good bearing grease work. The existing grease is 23 years old or so... The bearing is still perfectly tight and smooth at 120,000 miles.
|
|
|
|
|
03-17-2019, 01:59 PM
|
#2 | |
|
AF Newbie
Thread starter
Join Date: Aug 2007
Location: Richland, Missouri
Posts: 41
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: 95 GMC K3500 4wd front inner wheel bearing grease
Done with this question... got no idea! Timken makes the bearing but would not respond to a request for grease spec.... So I just put it back together and will wait for grinding noise when I turn... or maybe squeekz and skwaks!
|
|
|
|
|
|
|
POST REPLY TO THIS THREAD |
 |
|
|
