 |
 |
 |
|
|
 |
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Beef Dog Food | IgorSushko.com | Corporate |
 | | ||
| |
|
| Latest | 0 Rplys |
|
|||||||
 |
 Show Printable Version |  Email this Page | 
Subscribe to this Thread
|
|
|
Thread Tools |
07-29-2018, 10:29 PM
|
#1 | |
|
AF Newbie
Join Date: Nov 2005
Location: Burlington, Iowa
Posts: 87
Thanks: 16
Thanked 1 Time in 1 Post
|
02 Escape 3.0 Vacuum circuit.
I repaired a separated vacuum connection in my daughters Escape but I don't know what I repaired. I've been all over the web no luck. As I stand in front of the car facing the motor the vacuum circuit connects lower right side oa the motor up to a connection at the top of the air duct. From their it runs over to a connection to the rear and below the EGR valve. the connection a repaired was the one behind the EGR valve. It was in two pieces and almost looked like it was fried apart. Do I have something developing that I should be concerned about?
|
|
|
|
|
07-31-2018, 04:17 PM
|
#2 | |
|
AF Newbie
Thread starter
Join Date: Nov 2005
Location: Burlington, Iowa
Posts: 87
Thanks: 16
Thanked 1 Time in 1 Post
|
Re: 02 Escape 3.0 Vacuum circuit.
I believe I've got it. The vacuum circuit I described above supplies filtered air through the air input tube to both valve covers in support PCV system. Correct me if I'm wrong.
|
|
|
|
|
|
|
POST REPLY TO THIS THREAD |
 |
|
|
