cruise control

[GordonL]

I just bought a 2013 Tacoma and it did not come with cruise. I bought a kit which contained the Toyota parts and a wiring harness plus a clutch switch because it is a manual transmission. I got everything installed and wired OK. I have double checked the wiring but it just does not work. The trouble shooting says to check for voltage at the switch under the shroud on the steering wheel. I do not have any voltage so it says to check the continuity from the connector under the air bag to the ECM but I have no idea where to find the correct wires, Has anyone ever installed one of these and have any idea where to check the circuit?

The only wiring diagram I have is the Haynes manual which is extremely sketchy.

[somick]

I have seen a similar thread at Toyotanation.

If I find it there I will post it here.

Good luck,
Sam

[somick]

See if that thread will help you:
http://www.toyotanation.com/forum/61...ntrol.htmlwill

Good luck,
Sam

[GordonL]

I do not know what the problem may be with the Toyotanation Forum. I was out of town and was able to view the discussion on my Kindle but thought that I would wait to look at it on my computer. My computer does not go to the discussion. I tried to register and received a text for verification but when I try to log in it asks for image verification but there is no image. I cannot contact them because again it asks for image verification but no image. I cannot even do a search without image verification. Any ideas?

The discussion looked interesting but as I said I thought that I would wait to be able to see it in large format.

Thank you.

[somick]

Originally Posted by GordonL

I do not know what the problem may be with the Toyotanation Forum. I was out of town and was able to view the discussion on my Kindle but thought that I would wait to look at it on my computer. My computer does not go to the discussion. I tried to register and received a text for verification but when I try to log in it asks for image verification but there is no image. I cannot contact them because again it asks for image verification but no image. I cannot even do a search without image verification. Any ideas?

The discussion looked interesting but as I said I thought that I would wait to be able to see it in large format.

Thank you.

I would wait. It may take time to replicate their servers.

Try to Google it.

Good luck,
Sam

[GordonL]

I can get in through Facebook. I am not too keen on that. Facebook tracks everything.

I did figure out what my problem is. Where they show wires into the ECM they show face. That means the end of the plug without wires. I thought that it would be the other way around. In any case once I got the wires in the right place it works.

[somick]

Originally Posted by GordonL

I can get in through Facebook. I am not too keen on that. Facebook tracks everything.

I did figure out what my problem is. Where they show wires into the ECM they show face. That means the end of the plug without wires. I thought that it would be the other way around. In any case once I got the wires in the right place it works.

Great!

I am glad you figured it out and it works.

Sam