View Single Post
Old 11-01-2017, 03:14 AM   #4
AF Newbie
Thread starter
Join Date: Jan 2014
Location: Los Angeles, California
Posts: 7
Thanks: 0
Thanked 0 Times in 0 Posts
Re: Help with trailer wiring: It works when first wired-up, then stops working

Thank you for the suggestions. However, it looks like I have good continuity to the ground. I used an ohmmeter to measure the resistance between the ground of the flat connector and one of the bolts underneath the plastic threshold for the rear hatch (the only place I could find exposed metal). The meter read 0.9Ω. My meter has a continuity test feature which sounds a tone when there is low resistance. Using that feature, there was a strong, continuous tone. If I should be testing the ground wiring some other way, please let me know.

Is it possible that my T-connector is defective? ( The T-connector includes a literal black box that was described as 'a circuit-protected converter'. Might that be 'protecting' the circuit by shutting it down, perhaps in the way a ground fault interrupt does?

Last edited by T.C.; 11-01-2017 at 09:33 AM.
T.C. is offline   Reply With Quote