View Single Post
Old 04-30-2017, 12:04 PM   #5
rracer
AF Newbie
Thread starter
 
Join Date: Feb 2017
Location: Magnolia, Texas
Posts: 7
Thanks: 1
Thanked 0 Times in 0 Posts
Re: resistor engine control module MD145962

The code has come off the ECU I'm not getting any codes off the TCU using my 10v meter and I think it takes a 12V meter to make it happen.

I'm going to put the passenger side back together and install the battery. One drawing I saw put it on that side of the fire wall so I took it apart to see if it was down by the fuel filter. Let me see if I get any other ECU codes. Should I start the car before running and codes since the battery has been out for 24 hours? Thanks
rracer is offline   Reply With Quote