Quote:
Originally Posted by John18d
Sebasoakley - I am not 100% positive on the ties that were used for the 84' Honda NSR500 forks, but I believe they are "tie wraps" from Model Factory Hiro and they come in sets of Black or White.
Imster did one hell of a job on the 84' NSR500 - his best work to date for attention to details and the BEST 84' NSR500 on the forum to date in my opinion.
I can only hope when I am out of the hospital in 3 & 1/2 months time the one I plan to build will come out half as good as the one built by Imster.
I Hope this can help you identify the wraps Sebasoakley.
Cheers
John
|
Apologies for not replying sooner, been very buys with house moves and other stuff!
The tie wraps were made from plasticard because when I built this the MFH tie wraps were not produced yet. I cannot remember the thickness of the plasticard but it was very thin (almost like paper) and clear. so you sand the surface to give it the cloudy colour and then cut into tiny strips then just anchor down with CA glue and the rest is straightforward!
Once again sorry for the delayed reply and thanks heaps John for the nice comments. I hope your recovery goes well
