Quote:
|
Originally Posted by Crvett69;71
---------------------------
65341
if you locate the oil pressure sending unit you can unhook the wire going to it and ground it to see if light comes on with the key on, if it does your sending unit is bad, if it doesn't its the bulb or wiring
|
Thanks so much for responding.
I looked at many U tubes and they show 4 screws to remove then the front part comes off.
My car has no screws and it looks like the black plastic on the entire front has to be removed.
The sending unit is in the center and the car has to be jacked up and to make it an easy job,the tire should be removed.
Another reason I want to put in the oil gauge.
I have the guage here and it also has a light in it
http://www.usaspecialty.co.nz/images...WP-warning.jpg
Tanks for responding
BOB