I just purchased a 98 contour 2.5 (non svt) with auto trans last week. It ran perfect when I drove it. I noticed the fuel pump was getting real noisy when the car key would turn. It still ran fine. No problems driving. Coming home, the car shuts off while I'm driving. I had it towed home and found the eec 20a fuse was blown. So I replaced it turn the key and it blew. I jiggled some wires around and finally got the fuse to not blow but it still will not start. It turns over but doesn't start. I replaced the fuel pump and the camshaft position sensor and still won't start. Also, the overdrive button didn't work either. Now when I turn the key, the fuel pump does not come on and the plugs are not firing but the car will still turns over. I checked all the fuses again, the fuel shutoff button, and any visual broken/touching wires, everything is ok. I'm thinking it might be the pcm or the pcm for the fuel pump if applicable. Any ideas?