View Single Post
Old 03-25-2006, 10:56 AM   #13
Blue Bowtie
Registered Offender
 
Blue Bowtie's Avatar
 
Join Date: Mar 2006
Location: Rural
Posts: 6,513
Thanks: 6
Thanked 341 Times in 336 Posts
Re: 2000 Windstar ATF change

Quote:
Originally Posted by lewisnc100
You might consider adding a drain plug kit while you have that pan off.
That "kit" would consist of a Dorman 65245 ½-20 pilot point drain plug, a ½-20 jam nut, and a bit of drilling/welding or brazing. You can install the plug just to the right and rear of the magnet in the left end of the pan. I've done three of these AXOD-E/AX4*s this way with no problems. (I rarely remove a trans pan without installing a drain plug.)
Blue Bowtie is offline   Reply With Quote