View Single Post
Old 05-21-2019, 10:00 PM   #6
G84
AF Newbie
Thread starter
 
Join Date: May 2019
Location: Niagara Falls
Posts: 4
Thanks: 0
Thanked 0 Times in 0 Posts
Re: Muffler cement vs?

Quote:
Originally Posted by Stealthee View Post
Aluminum foil is not going to work. Either retap the hole or have a new bung welded in.
Ok well I could retap and use a helicoil. The problem with that is I'll have to remove the exhaust pipe and there's a crossbar under there that will be in the way. I'm sure it's not hard to remove the crossbar, but the back of the transmission is mounted to it. The only way I can see to do it would be to support the transmission with my Jack and then remove the bar. The problem I can foresee with that however is that the Jack will be in my way when working to get the exhaust pipe out. Are you familiar with the 3rd gen rams and if so Do you have any suggestions ? Thanks
G84 is offline   Reply With Quote