View Single Post
Old 03-17-2010, 07:01 PM   #11
DOCTORBILL
Geo Metro Lover
Thread starter
 
DOCTORBILL's Avatar
 
Join Date: May 2005
Location: Eastern Washington State, Washington
Posts: 1,622
Thanks: 0
Thanked 0 Times in 0 Posts
Re: THE PHOENIX Lives AGAIN ! - It's Alive, It's Alive !

My Distributor O-Ring has a flat outer surface.

Is that the way they come - or are any even available now for old Geos ?

If you (or anyone !) knows the dimensions for the Geo Metro Distributor O-Ring,
by telling us here and now, you would save many, many people the ridiculous problems
of trying to find one !

In Googling this problem - not one person knew the size - it was always "take the
old one in to a store and buy something of the same size..."

That is the HARD WAY and leads to the wrong sizes being used - as the Google'd links all say.

Many people have hard and/or broken O-Rings, so they cannot buy comparable sizes....

THE CORRECT DIMENSIONS is what is called for - for all to read about.

Metric or English ?

To buy O-Rings, you need ----> ID and OD and Cross Section Diameter.

If you have one in a drawer, please get out the calipers and measure it for us !

Post it here and I will enter it into the Indexus Metrogloditus link at the top of the Forum.
http://www.automotiveforums.com/vbul...d.php?t=938134

Please - somebody enlighten us !

End this ceaseless and aimless wandering around begging for O-Rings...

DoctorBill
__________________

DOCTORBILL is offline   Reply With Quote