View Single Post
Old 04-24-2019, 11:54 PM   #2
AF Newbie
Thread starter
Join Date: Apr 2019
Location: Hernando, Mississippi
Posts: 4
Thanks: 0
Thanked 0 Times in 0 Posts
Re: Pilot bearing/ sleeve removal

Replying on self for anyone who might have this issue in the future. Grease trick did not work best way ive found so far is to cut grooves 180 degrees from each other with tungsten carbide cut off wheel on a dremel then use a pilot bearing puller tool with a slide hammer. Came out in about 15 seconds using this method.
Firstsonofodin is offline   Reply With Quote