View Single Post
Old 08-07-2005, 03:56 AM   #4
chevytrucks92
AF Enthusiast
 
chevytrucks92's Avatar
 
Join Date: Mar 2004
Location: Pikeville, Kentucky
Posts: 1,658
Thanks: 0
Thanked 0 Times in 0 Posts
Re: Racers.... post your times

Haha. I wished mine was down to about 2500. It'd run 4.teens in the 330 (that'd be about 6.30s in the 1/8th, and probably 9.90s in the 1/4-if it weighed 2500 lbs) atleast if it only weighed 2500 lbs.


As for my converter. I think its supposed to be a 5000 stall, but I dont know for sure. Its really too much for this engine, but it was bought for the 406 that I blowed up.

As for my R's going through the lights, I think this motor (355) is turning about 5500 rpms (in high gear of course) at the 330 mark (that's all I run is 330 ft). The 406 would go through at 6000 rpms. I shift at 6400 rpms and chip it at 7000 rpms. So I'd even have trouble in the 1/4. I'd say with this 355, it'd probably make it to the 1000' mark and start hitting the 7000 rpm chip. With the 406, I'd say it might have went 800 ft before it got on the chip, if that.

And my car is planted firm going through the 330, and I generally hold it about 100' past the line. About the only trouble I ever have is it bringing the wheels up, particularly the left front. But it doesn't do that much at all with this 355. It might bring the left front about 5 inches. With the 406, it'd come up a foot. But even at that, the car still went straight. Sounds to me like you'r trying to run too little air pressure, since you're weeving on top end.
__________________
**1966 Chevy II**

355 SBC, Turbo 400, 5.13 gear, IHRA Certified to 8.50 in the 1/4
Last Race (10-6-07) So its been awhile...
Dial: 6.77, RT: -.0001, 60': 1.4360, 1/8th: 6.7942 @ 100.65 mph
Fastest Pass of '07 (10-6-07)
60': 1.4360, 330': 4.3453, 1/8th: 6.7942 @ 100.65 mph


25 and in BIG TIME Debt Crew member #2
Deuce's Wild Racing: Take a Ride on the WILD SIDE
chevytrucks92 is offline   Reply With Quote