Re: 1991 Wrangler 2.5 no start
Quote:
Originally Posted by rhandwor
You can use WD-40 and spray along edges of intake manifold while cranking. If you find a leak replace the gasket.
Get a long 1/2 drive ratcket with a socket that fits on the bolt for the harmonic balancer. Turn 180 degrees then align the timing mark at 0 degrees. Pull the distributor cap use white out and mark the rotor tip. Assuming you turned clockwise now turn counter clockwise stop when the rotor starts to move anything over about 10 degrees will cause problems.
|
Holy cow, nearly 16 degrees of lash prior to rotor movement! New timing chain then?
__________________
2008 Tahoe SSV, 2007 Tahoe SSV, 94 GMC K1500, 93 Chev K1500, 91 GMC K1500, 2000 Wrangler Sport
|