Quote:
Originally posted by audiotech
hey guys , I am new here . I was wondering if someone could help me figure out how to program a keyless remote for a 95 Blazer . I have done one before on a T/A I had , but the wire configuration in the diagnostic terminal is different here , there are only 6 wires in the back of it . Thanks !
|
Sorry it took so long, but I finally found a GM tech that would help.
Drop the underdash. there are 3 -7mm holding it up. Right next to the parking brake mounted on the underdash pane is a module. This is you keyless entry module.
Ground the black wire with the white stripe wire
The doors will lock then unlock, and the hatch should pop
press lock on each remote one at a time
The doors should lock/ unlock to confirm the remote(s)
Remove ground from black/white wire.
Hope that helps!
