Next step are the come together of body and chassis.
The front wheels did not fit into the small wheel arches.So i had to scratch a bit.I sanded the wheel on the top and on the bottom a bit.
Was better but still a right height of a SUV.
So i used a styrene sheet under both side and now it looks way better.You can see the brown putty i used for it.
First time for me to open the door.Works well,but again a problem was detected.
When the door is open it can lay onto the fender just like the real car ca.
Seams like Tamiya did some strange angles at the body.
So i simply cut another edge from the door and now it can be glued to the fender when its done.
Its not correct,but it works.That is what counts.
On the inside i used some pins and sockets to hold altogether in the right spot.works fine,only need some fine sanding.
Christian