[MPWR]

More parts:







Rear dampers for my 1/24 Ferrari F50. These are the first scale machined parts I did. (Amazing that my cutting mat was once that clean.) Everything was turned on the lathe using the kit part as a pattern. The kit part was then cut apart and the damper mounts from it were used to mount the new parts.







These are brakes for a 1/24 Ferrari Testarossa. The shape was done on the lathe, but the mill and rotary table was used for the lug bolt pattern.





These are joiners to connect the Testarossa's exhaust manifolds to the resonator. (How to discussion here)