After I completed this repair (replaced the elbow connector) the car runs great and no engine light
After a couple days of driving I noticed a slight smell of engine coolant, so I found the problem to be needing to replace a hose clamp. After I fixed this, I used a garden hose and spray nozzle to gently rinse the residual coolant from the engine.
Now, the engine will not start. The engine turns over and there is gas being sent to the cylinders, but there is no attemp to start at all. I don't thinik there is any spark at any of the plugs at all.
What would likely have happened?
Anyone have a thought on this?