View Single Post
Old 12-21-2004, 01:49 AM   #1
hks_kansei
AF Regular
 
hks_kansei's Avatar
 
Join Date: Dec 2004
Location: melbourne
Posts: 451
Thanks: 0
Thanked 0 Times in 0 Posts
Lightbulb HOW TO: Tuner exhaust without styrene (pics)

ok, i posted this once before but i finally got around to taking some photos.
[IMG][/IMG]
these are what you'll need

[IMG][/IMG]
the pen should look like this when taken apart

[IMG][/IMG]
cut rougly an inch of the pen barrel (depending on scale, mine is is 1:18)

[IMG][/IMG]
now the confusing part, cut away the edges of the pen tip until it fits in the barrel (be careful not to split the barrel)

[IMG][/IMG]
i found that using a vise is best as you can slowly wind the pen into the barrel

[IMG][/IMG]
bend a nail and put it in the back and you will have a tuner exhaust, now just paint it.


there, now you have pics and should be able to understand (sorry about the wait)

Last edited by hks_kansei; 12-21-2004 at 08:05 PM.
hks_kansei is offline   Reply With Quote