Quote:
Originally posted by rockerdude
thanks bro. can i put the two piece together than put the sealant on the edge between the two gap that connect the pieces together.
====== <1st piece
----------- < part that connect pieces together
====== <2nd piece
you have idea what i'm talking bout right?
|
I think so. The idea is to replace the sealant that you scraped off when pulling it apart.
====== <1st piece
++++++ < thin film of sealant
----------- < part that connect pieces together
++++++ < thin film of sealant
====== <2nd piece
GE Silicone II has a good work time of about 5 minutes. You'll want to hold it firmly in place for that time, and then clamp it lightly for 24 hrs after. You could just put a big book on it or something. Then just to double-seal it, you might want to smear a bead of silicone around the outside edge.
Good luck.