View Single Post
Old 03-16-2015, 10:07 AM   #1
hevi99
Banned
 
Join Date: Mar 2015
Location: Berwick, Pennsylvania
Posts: 16
Thanks: 0
Thanked 0 Times in 0 Posts
1996 blower motor stopped working.

I have a 96 Village GS. The blower stopped working. I've trial and errored everything I can think of. I can get it to work, but by rigging it. I've checked everything with test lights and multimeter. Here's what I came up with so far. Power is reaching the relay but from there it seems to half stop, by half I mean the 28 fuse is getting power, but the 31 fuse is not. The relay is new and tested and working properly. If I take a jumper wire from the left side of the 28 fuse to the right side of the 31 fuse everything works, but the fuse blows if you turn the fan speed above 3. I'll post a diagram below. I don't have EATC so you can ignore that part in the diagram. Any help would be greatly appreciated.


forum.jpg
hevi99 is offline   Reply With Quote