View Single Post
Old 08-29-2016, 04:49 PM   #6
Checkerknight
AF Newbie
Thread starter
 
Join Date: Aug 2016
Location: Allendale, Michigan
Posts: 9
Thanks: 0
Thanked 0 Times in 0 Posts
Re: Installing an aftermarket radio

Quote:
Originally Posted by PaulD View Post
As far as the wiring goes, you will need a multimeter. Set it to volts, put the black lead on metal behind dash and check each wire carefully with ignition on and off, lights on and off, etc .. to determine which wire is what.
Now your talking the wires from the back of the radio i assume right? As I stated the only thing coming from the car is the piece that I am holding. The 2 to the side of the picture go to the speaker. So you're saying to hook up the radio and then check all the speaker wires from the radio?
Checkerknight is offline   Reply With Quote