Hi all,
My AC recently stopped working, the compressor was cycling on and off but would not run continuously. I charged the system to the proper pressure but that did not fix things. I then bypassed the low pressure switch and voila, the compressor kicked on and I now have cold air and the system seems to work well.
My problem now is this - I replaced the low pressure switch but the system doesn't work with the new switch either.. the AC only works when I bypass the switch but not with the new switch.. what could be the problem? I don't really want to run the system with the switch permanently bypassed but not sure what the problem could be at this point.
Your advice is appreciated.