When I mounted the front roll bar to the cowl/windshield frame I paid attention to get a good fit for the windshield. But now the hood/fenders/nose doesn't fit very well to it. Not a surprise and an easy tradeoff. But it also turns out the dark blue plastic the body is molded in is really brittle.
A goal from the start was to not have the body panels under tension when assembled, but now it is very important due to how many cracks and parts have broken under just modest stress. Brass reinforcements have been added along the way including the pins and machined tubes for mounting points at the cowl. To cut down on the load/stress I had to add mounting points to the front of the tub and hood too.