View Single Post
Old 10-19-2005, 07:25 PM   #9
eclipsed4utoo
AF Fanatic
 
eclipsed4utoo's Avatar
 
Join Date: Dec 2003
Location: Florence, South Carolina
Posts: 1,965
Thanks: 0
Thanked 0 Times in 0 Posts
Re: Re: Re: How to program my keyless entry??

Quote:
Originally Posted by kiger
you do nto have to take it to the dealer,, if you look through some of the threads you can find instructions on how to do it....sounds like other dude has a problem... i mean if its that big of a deal do not read the thread

I did the same thing, but i found that the instructions were very easy to follow! Here they are:

1. Locate the Data Line Connector (DLC) underneath the driver's side dashboard. The DLC is typically located either to the left or the right of the steering column base. Notice how the DLC is tapered on both ends: you will be working on the wider row of cavities
2. Insert keys in Ignition and leave in the off position.
3. Make sure there are metal contact pins in terminals 1 and 4 and connect the Data Line Connector (DLC) terminal 1 to terminal 4 with a suitable jumper wire, leave the jumper wire connected throughout the programming procedure). Make sure you know which terminals are 1 and 4.
4. Within 10 seconds after connecting the jumper wire, press the Hazard Switch 6 times. (Note) The doors will automatically lock and unlock once at this time indicating that the system is in the programming mode.
5. Press either the lock or unlock button on the transmitter to be registered three times within 10 seconds. Upon successful
programming, the door will lock and unlock once.
6. Repeat step 5, with any other remotes to be programmed (up to four remotes) (including any existing remotes), within one minute. After completing each programming, the doors will lock and unlock once.
7. Disconnect the programming wire and remove the keys from the
ignition.

For the jumper wire, i was able to use Paperclips... they worked great! If you want, have someone else in the car to press the hazard switch and the remote while you hold the paperclips together! Any other questions, email me! Ill send you the directions in word format with picture diagrams!
so you did a search?
eclipsed4utoo is offline   Reply With Quote