View Single Post
Old 08-19-2008, 05:43 PM   #8
XR400R
AF Newbie
 
Join Date: Mar 2007
Location: Madison, Alabama
Posts: 66
Thanks: 0
Thanked 0 Times in 0 Posts
Re: fixing the fuel sending unit

Quote:
Originally Posted by rodeo02
Sure can. You can bend the 'wiper arm' contact back against the circuit board. These two parts loose contact with each other ( the mating surfaces wear) over time causing the sporatic fuel gauge readings. From what I understand, the same thing will happen again every 30-60000 miles, with a new or 'adjusted' FSU. There are write-ups on this floating around either here or planetisuzu.
G/luck
Joel
Although this is a mighty old thread . . .

Sure hard for me to see how. I changed mine recently & the variable resistance contact was burned almost down to a nub. Hardly anything left to bend. I simply replaced the entire pump since it had 110K miles & I was hoping not to have to drop that tank again for the remaining term of my ownership. No ECM re-flash required in my case.


__________________
2001 Passport, 3.2L V6, 4X4, Auto, 130K mi., mostly stock
XR400R is offline   Reply With Quote