Emergency/Parking Brake works but the main cable has a slight bit too much slack evident by peddle not coming all the way back up to the released position and the eBrake light on dash sometimes remains on. I checked the travel of the levers at each wheel and it's releasing as it should be.
I also have to press the eBrake peddle all the way to floor to get the brake to hold. CABLES simply need more tension! Something like 1/2" more tension.
Problem is, I don't see any tension adjustments under the vehicle. The point where all 3 cables connect has no adjustment. (as most other vehicles have an adjuster here).
The only way I can see to adjust the tension is to change the short cable that's located in front of the intersection of the 3 cables. In other words, I have 2 cable connectors with a short cable between them that are located just prior to the point where the 3 cables meet.
What are my options for adjusting the cable tension?
--pete--