View Single Post
Old 10-02-2012, 09:58 PM   #9
J-Ri
AF Enthusiast
Thread starter
 
J-Ri's Avatar
 
Join Date: Dec 2004
Location: Shellsburg, Iowa
Posts: 3,218
Thanks: 8
Thanked 0 Times in 0 Posts
Re: FE1 or FE2 suspension?

There is a very small difference, about 3/8". In the picture below, the shiny new one is FE2, and the old dirty one is FE1. I removed the camber cam-bolts and the camber appears to be almost identical with the long arms with the original bolts (non-adjustable).



As for why I couldn't use the arms I have... The rear hole where the pancake bushing goes was bent to an oval, I couldn't even get old bushing out. I'll have to post a pic, but you won't believe I didn't stick in in a vise or beat the hell out of it with a hammer
__________________
'04 Cavalier coupe M/T 2.2 Ecotec
Supercharged 14 PSI boost, charge air cooler, 42# injectors
Tuned with HP Tuners
Poly engine/trans/control arm bushings
Self built and self programmed progressive methanol injection system
J-Ri is offline   Reply With Quote