And the Super Simplified Version
Swap outside TPS Sensor Wires.
Injectors:
#1: Current Yellow wire, should be brown
#2: New Red Wire ran to A3 on ECU
#3: Current Red wire, should be Light Blue
#4: New Yellow Wire ran to A7 on ECU
Red/black wires on all injectors ran to Injector Resister Box
Yellow/black wire on Resistor box plug to thick Yellow/black wire on Engine harness plug(was ran to main DPFI Injector)
Distributor:
All colors match to new plug. Solo white wire goes to solo white.
New Blue/Green wire goes to C1 on ECU
New Blue/Yellow wire goes to C2 on ECU
ECU:
Current C1 goes to B10
Current C2 goes to B12