I copied this from another forum a while back (they're referring to the DLC1 - data link connector under the hood):
Use two short grounding wires, one at TC and one at AB, then
> >
> > With the key ON
> > TC one second
> > AB one second
> > TC one second
> > AB one second
> > TC one second
>
> But maybe 1.5 seconds, just being pretty close will work though.
>
> Light should be out. Report back with your results.
I approximated the time between grounding TC AND AB (roughly .5 to 1 sec) and
then held Tc to ground and the light flashed continously..I removed the ground
from TC and Voila' problem solved.I took me two tries....not too bad.Thanks Alot.