View Single Post
Old 10-26-2004, 10:54 PM   #2
Slowprocess
AF Enthusiast
 
Slowprocess's Avatar
 
Join Date: Jan 2004
Location: Cleveland, Mississippi
Posts: 1,356
Thanks: 0
Thanked 0 Times in 0 Posts
Send a message via Yahoo to Slowprocess
Re: Body Side Moldings Help

Quote:
Originally Posted by TwentyPints
i really wanna pull them off but a bit cautious about it cause i really don't wanna screw up the paint. is it just glue or double sided tape under there? i don't know why chevy uses such ugly moldings. the sierra at least has ones that look half decent.
I took mine off after about 3 years. It's nothing but 3m holding it on. You will have some adhesive on the truck after you remove the molding, but 3m makes some really good adhesive remover. I carried mine to the car washing place, wet it down, and used the remover. Then, when I got the adhesive off, I washed it with soap again, and you couldn't tell it was ever there. Just takes a little elbow grease.
__________________

Daily Driver- 00 Camaro SS A4 1/4- 12.30@118mph 2.14-60ft on street tires
Weekend Warrior-99 Silverado "Dirty" 1/4-11.63@118mph 1.8-60ft
Slowprocess is offline   Reply With Quote