hey i was hopeing taht you could till what would make my car loss power at high speeds and it being harg tostart and missing after a tune up thaqnks ashandant247@yahoo.com
Where do I plug the converter into the battery? I'm not sure If I explained it well enough in my post, but I'm not going to have access to my vehicle, just the battery itself. I plan on bringing along the battery, and using it to power/charge my laptop while I'm hiking in the woods. Thanks in advance for your help.
I i want to thank you first for helping a lot of guys like myself fixing our vehicles. Now, i want to replace the pcv valve on my 02 ls v6 and i would be glad if you could send me some pictures that you may have so i can do it. barrera__marine@hotmail.com
I started at 6:30am this morning, It took me about 5 hours in all, I'm not much of a mechanic. The Rubber elbow had 2 tears in it, it was all collapsed.
I would not have been able to do this job without the photos.
Hi Rod,
I need to replace the PCV elbow on my 2001 Ls V6. I was hoping to get any pics or pdf files you may have. I have to get this fixed before Monday. I hope to hear from you. You can email me at shep4297@yahoo.com.
Rod -- I just replaced my thermostat and cooling fan on my '03 lincoln ls v8 due to the dealer telling me that was the problem. Prior to me taking the car back from them they reset the "powersafe mode" so I could drive home. So to replace everything I disconnected the battery, replaced the thermostat and cooling fan, and put in a bottle of coolant into the valve at the thermostat. Once I reconnected the battery and stated the engine, it immediately went into powersafe mode again. Can I reset this myself or do I have to bring the car back to the dealer to get them to reset it. Where can I get something do give me the computer codes messages??
Please help thank you I am out of money and patience.
hay i am search for airbag code 16. car is a 98 ford taurus. i see you have told what lots of the airbag codes are on here. cant find that one. i have re[lace the bags and control module. it was flashing same code with old module. i have done many gm bag replacements didnt know if i was missing somthing on the taurus. thank you for any help. email - p8ntman777@hotmail.com
Brad