Cutting Wheelwells

iF I were to completely cut the wheel wells out.. would it loook ok, and wuld i be able to control the ride height..... OR could i cut the wheel wells off, then putty, and strene to make them higher...

IM Talkin bout the CHASSIS HERE, i will Camber and if needed, tuck the wheels inside..

:) Yes you can, but it could turn out to be allot of work. You might be better off just trimming the springs & spension and adjusting the arms to keep it steerable. If you don't care about being able to steer then don't even worry about any adjusting just cut away. I you look closely here in the third pic you can see I cut out the wheel well to make the car dropped more. I hope this helps.

http://files.automotiveforums.com/uploads/7840822.jpg
http://files.automotiveforums.com/uploads/8677134.jpg
http://files.automotiveforums.com/uploads/5545505.jpg

Thats actually A very good idea, The idea of Bending styrene higher up! I may need to try this!!

Only thing is when you bend it you must heat it up first far from a flame or even boil it and it will bend easily then to set it once you got the position you like dip it in ice cold water. Works pretty good, but play with some strips first before using the real thing because of how thin or thick the parts maybe. Let me know what you think once you have tried it.

Originally posted by nervestrikes
when you bend it you must heat it up first far from a flame or even boil it and it will bend easily
woa, boiling styrene?! never herd of that, anyone have any experiences with that?