d15b head swap


tylertime
04-06-2003, 06:32 PM
i was wondering if anyone knows if a d16a sohc head will fit on my d15b in my 90 dx

i know a guy selling a d16a head with hi po cam and porting and I would like to buy it
WILL IT FIT??

and i know i shouldn't be using a 1.5l but its what i got.

if anyone can help me that'd be awesome

civickiller
04-06-2003, 07:45 PM
d16a what ?

tylertime
04-06-2003, 08:20 PM
d16a6

from a 91 si i beleive 1.6l sohc 16v

crxlvr
04-06-2003, 08:35 PM
yes it will swap

tylertime
04-06-2003, 08:36 PM
just a matter of bolting it on??

crxlvr
04-06-2003, 08:37 PM
not quite, no swap is really plug and play, you might have some wiring issues to play around with, do a search for "mini me" swaps and you'll get more info.

tylertime
04-06-2003, 08:38 PM
right on thanks a lot

ALL MOTOR D15B
04-14-2003, 05:15 PM
it should fit im doing a similar swap..d15b1 block with d16a6 head/intake manifold...this is the setup i plan on doing..

AirMass 4-2-1 Header
B&M Fuel Pressure Regulator w/ Gauge
D15B1 Block...Decked, Honed, Bottom-End Fully Balanced, Hot Tanked
D16A6 Head Milled .035 /Intake Manifold
D16A1 Pistons w/ D15Z1 Rods (should i get these shot-peened?)
Skunk2 Cam Gear

havent decided what camshaft im going to use either a JG301 or a Dealta 260 Regrind. my compression will be about 11.1 : 1

Rgacke
04-15-2003, 11:00 PM
the heads were cast from the same mold so it'll fit. the D15 isn't so bad as long as your using a good tranny.

Add your comment to this topic!