Our Community is 705,000 Strong. Join Us.


Stalling/Sluggish Acceleration..P0134/P0130


braybrax330
09-02-2009, 11:53 PM
My 04's TB's SES light came on over the weekend & has begun to stall at stops after anything more than 5-10 mins of driving. TB will run just fine after start up initially or even a re-start, until you drive about another 5-10 mins, then the issue seems like it creeps back up. When issue occurs the engine begins to shake & you can feel it get worse as you come to a stop. Acceleration is very shaky as well as though the engine is sputtering. Additionally, my A/C & circulation button will not stay lit, instead they flash a couple of times once pressed then go back out....I took TB to AZ & my codes were P0134 & P0130. AZ seemed to think that those codes pointed to o2 sensor but based on symptoms tough to believe that my root cause

braybrax330
09-12-2009, 11:51 AM
Somebody, anybody :confused:

bootleg233
09-25-2009, 10:40 PM
Again I bet this is it:::::::CAM ACTUATOR SOLENOID
NOT I repeat NOT sensor.

maxwedge
09-26-2009, 10:57 AM
Those codes point to o2 sensor issues, though.

bootleg233
09-26-2009, 04:57 PM
Those codes point to o2 sensor issues, though.
Well replace them and then when it does it again like it seems everyone is doing or has done then might have to look elsewhere. Just my 2 cents worth and that aint saying I know anything but good luck.

maxwedge
09-27-2009, 10:01 AM
What you suggest may be an issue, but when scanned with a high line scanner the operation of that component can be monitored, stops guess work, in the mean time that code points to an issue with #1 sensor, not " all" of them.

Add your comment to this topic!