removing 3.8 engine from 99 buick lesabre

i am pulling motor to rebuild(connecting rod bearings knocking). i am leaving transmission in. i seem to have everything unbolted but motor doesnt want to seperate from tranny. looking at it from from drivers side front wheel i removed 3 bolts from left side(closest to radiator) and 2 bolts from right side. if there is a 3rd bolt near tranny at bottom i cant see it. is there another bolt or do i need to be a little more forceful. so far i have just shaken chain and i can see clearance on left side but right seems to be holding. thanks so much for any help but please dont suggest pulling tranny also as i went round and round before deciding to just pull motor.

IIRC, there is one bolt near the bottom (firewall side) that you will need to remove from the right side using a 3-ft extension.

thanks hotz. had to remove oil pan to see it. motor is out

Haha, when I replaced the transmission on my 2000 It took me a whole day to figure that out. They really hid that one. Glad you got it out.