I really need some beehive valvesprings & an edelbrock rpm or rpm airgap intake for vortec heads.Let me know how much including shipping.Thanx guys

iw,

Looks like this one is "sitting here", so I'll throw something in...

Part number for the intake is Edelbrock #7516.

The valve springs will come from Comp, but you're going to need to know installed height and cam type.

I figure you're probably looking for "used" parts if asking here. Unfortunately, the parts you're asking about aren't old enough to be available "used", at least on ay regularity. I would NEVER buy valve springs used, unless you KNOW the source. The intake is a different matter. As long as the bolt holes are okay and it hasn't been extensively modified, it should be fine.

Figure on spending about $400 for the intake, springs and related hardware.

Jim