97 Geo Metro LSI Auto 4cyl TIMING??

I have a '97 Geo Metro LSI Auto trans 4cyl

And I can't figure this out. View my other post here:
http://www.automotiveforums.com/vbulletin/showthread.php?t=932993

I checked the timing and this is what it was set at when I first got the car:

http://gladshopper.com/pt2/small.jpg

Then I set it to the 5 mark on that plastic plate then it got to where I could step on the gas rapidly and the engine would die. So now I set it back and its better, but still doesn't seem like it's fast enough.

In the Pic above, is that where the timing should be???


Thanks,
~Zechariah

It looks as though your timing belt is off one tooth.

Okay, so would that cause it to be slow to accelerate?

Thanks,
~Zechariah

Yes it would. We asked you about that in the other thread. We also informed you that 150 PSI is below factory minimum of 156 PSI. This may be related to the timing belt off.

Okay, thanks I'll check this out tomorrow.

~Zechariah

B.T.W. does anyone have some online instructions on how to correct the timing belt? Thanks

http://www.teamswift.net/viewtopic.php?f=2&t=26588

Found in the index right above your post, took 30 seconds.

Thanks

Wow it was off 3 teeth, fixed it and now it's running much better.
Thanks a lot for the help everyone.

~Zechariah