Our Community is 705,000 Strong. Join Us.
03-04-2009, 02:14 PM
Hi guys i am having transmission problems with my Acura el 2000 the CEL light came on i used an odb2 code reader to read the codes # PO700 Transmission shift solenoid & PO740 Torque convertor clutch solenoid i check the ohm reading on both solenoids the Hanes manual said it should be 12.0 to 25.0 ohms on the ones that was on the car & the used ones both reads 14.5 ohms which is good i replace both with the used ones replace trans fluid after a week the CEL light came on again some times from second to third it would slip a little not all the time need some help to solve this problem.
03-04-2009, 02:36 PM
well this should be in the acura forums
03-04-2009, 03:47 PM
Moving to the Acura forums.
03-21-2009, 10:04 PM
Replace the transmission and torque converter. Replacing solenoids will not fix the problem. It's internal.
Automotive Network, Inc., Copyright ©2014