TS Moto GP front sensor help

I just received the Top Studio moto gp front sensor from Stradasports (thanks Kevin!), and the instructions are, shall we say...shitty?!? can somebody please shed some light on how to actually install this thing...

thanks guys,

Stuart

The instructions are pretty clear to me when it comes to assembly of the included parts, I guess you want to know how to attach it to the fork? I have just glued it in place using a tiny portion of super glue. On the resin part of the sensor there is a little knob that goes onto the fork.
/Joel

Hey Joel,

Yeah, I should have been more specific. The part I am trying to figure out is what I should attach the top of the sensor too?

Thanks,

Stuart

The top of the sensor ends up a cf bracket in the lower tri clamp (at least on most M1 bikes). This is also a fastening point for the air ducts. If you have the Moto GP racers archive for 2005 there is a good picture in the lower right corner of page 27. If you don't I can scan the picture for you.
/Joel

I'm having this problem too...would it be possible to get a scan copy too please? Also is it the same for the RC211V 06?

The top of the sensor ends up a cf bracket in the lower tri clamp (at least on most M1 bikes). This is also a fastening point for the air ducts. If you have the Moto GP racers archive for 2005 there is a good picture in the lower right corner of page 27. If you don't I can scan the picture for you.
/Joel

if you wouldn't mind, I would really appreciate it!

Sorry for the delay, pictures are a bit small. Will try to get some bigger ones but you get the basics.

M1 ´05

http://img.photobucket.com/albums/v239/joelwideqvist/m105.jpg

RCV ´05

http://img.photobucket.com/albums/v239/joelwideqvist/rcv05.jpg

As you can see they are a bit different.

/Joel

Oh bugger, the RCV pic was really bad. Will try and do better.
/Joel

Thanks Joel. I will be waiting patiently!