I posted about this issue earlier but I have done some work since. The motor's ground wire was "jumped" and the wipers were working for a while then stopped again. When the jumping was tried again the car started blowing fuses.

Now...

I have replaced the plug to the motor (that didn't work)
I replaced the motor (that didn't work)
I "jumped" the ground with the new and old motor (that didn't work)
I removed the ground and ran it directly to the frame (that didn't work either)

All it does is blow fuses!

:banghead:

Any ideas?

Thanks :)

-Jacob

Does your wiper motor work if you just hotwire it?

Did you replace the windshield wiper module?

What about the lead wire?