|
|
2000 wiper problembobby95 12-11-2008, 09:17 PM 2000 4-runner. With the wipers on intermittent the wipers don't go to the full off position and stay there- they come back up a little bit. In other words, they make a full cycle and instead of going to the bottom of the windshield and staying until the next cycle, they come back up a little. Doesn't do it all the time, but more often than not. I can also turn the wipers off in the middle of a cycle and the wipers will stop- even if they're pointing straight up and down- instead of returning to the bottom of the windshield as they should. Thanks in advance. Brian R. 12-12-2008, 06:09 PM Practically everything associated with wiper movement is in the motor. You probably need to replace the motor if you can't live with its lack of function. bobby95 12-16-2008, 05:21 PM OK. I was thinking that the motor might be controlled by a time delay relay or something for intermittent operation. Brian R. 12-17-2008, 08:20 AM I am basing my above statement on the method for troubleshooting wiper problems as outlined in your service manual. I may be missing something so it would be wise to read it also and double check my logic. See the following links: http://rapidshare.com/files/34005580/Toyota.4Runner.1987.1998.SIL.MMedia.RUS.part1.rar http://rapidshare.com/files/34006565/Toyota.4Runner.1987.1998.SIL.MMedia.RUS.part2.rar http://rapidshare.com/files/34004224/Totota.4Runner.1996.2002.SIL.rar http://rapidshare.com/files/34007037/Toyota.4Runner.2002.Audio.SM.rar vBulletin®, Copyright ©2009, Jelsoft Enterprises Ltd.
Automotive Network, Inc., Copyright ©2009
|