The washer pump has stopped working (reservoir full) on my 2004 durango. I can't find anything in the user manual on fuse locations. Could it be a fuse? If not is the pump user replaceable? Thanks for any help.

Brian in MI

Most pumps are on the bottom of the tank unplug it and use a 12 volt test light and check for power. If you have voltage pull off the hose and make sure it isn't pumping. I've found a blockage is more common than a bad pump. I just pull hose next to nozzle as this is where the majority of blockages occur.

Yes, it could be a fuse. Just replaced one on my current vehicle (not a Durango so I can't tell you which fuse to check in your case).