im trying to figureout where the crankshaft sensor is on my car i cant find any diagram or website that will show me where it is for free po316 says that my crankshaft position sensor signal is reporting errors but i have no idea where it is code # po302 is a cylinder missfire in cylinder number 2 i have recently replaced plugs and wires both r fine injector could be an issue and fuel filter was replaced 3 months ago i have no idea what to do im a poor college kid with some mechanical background carr will sputter at low rpms only between 1000 and 3000 and after that it is perfectly fine need to know where crankshaft sensor is and what else could be my problem thanks

sensor should be mounted behind harmonic balancer (crank pulley)

If you have a code P0316, that is misfire detected in first 1,000 revolutions of engine. The crankshaft sernsor is a P0315. If you have a P0302, try repairing that code and erasing the memory. This should cure the P0316. Good luck.

how would i fix the 302 i have spark i have fuel im lost man im not really sure where to start i just recently replaced everything it could be a vaccume leak but i dont hear any leaks

One place to start would be to use periods in your posts so we can tell where one thought ends and the next begins.

A misfire can be due to spark, air/fuel ratio, or compression. Spark can easily be intermittant. The symptoms you describe though sound common for a spark misfire. Since you say the plugs and wires are relatively new, make sure the wires are seated securely on the plugs. Are the wires quality wires? If not, it wouldn't be all that surprising if one or more of the ends have poor crimps.

-Rod