|
|
2005 Town and Country hazard lightsjeffreymo 09-12-2008, 10:51 AM Hey guys, I'm a newbie here. Just picked up my T&C LX last night, and so far have only one complaint, and I'm hoping that someone can help me, as the vehicle did not come with an owners manual. When opening either of the side doors, the hazzard lights will start flashing, but just for a few seconds. Please tell me that this can be disabled, and if so, how do you do it? Thanks in advance. Airjer_ 09-12-2008, 11:42 AM The Sliding Door Open Flash can be enabled or disabled by performing the following procedure: 1. Place the key in the ignition switch. 2. Cycle the ignition switch ON/OFF four times ending in the OFF position. (do not start the engine) 3. Within 10 seconds of the final cycle, press the hazard switch. 4. A single chime will sound to signify that you have successfully completed the programming. You can turn the feature back on by repeating the above mentioned procedure or by performing the procedure in the Electronic Vehicle Information Center (EVIC), Customer Programmable Features section on vehicles so equipped. You can download a manuel off of chryslers website. http://www.chrysler.com/en/owners/manuals/index.html?year=2005&nameplate=Town%20and%20Country jeffreymo 09-12-2008, 12:32 PM Thank you for the info, I will try it soon! Airjer_ 09-12-2008, 12:40 PM Sounds good! I happen to like the feature personally and have had nobody request it to be disabled so I have never tried it. That is directly from the owners manual from an 05 town & country so it should be right!! vipergg 09-14-2008, 07:16 AM Sounds good! I happen to like the feature personally and have had nobody request it to be disabled so I have never tried it. That is directly from the owners manual from an 05 town & country so it should be right!! It works I turned that off on my 2007 when I first got it , just found it annoying . vBulletin®, Copyright ©2009, Jelsoft Enterprises Ltd.
Automotive Network, Inc., Copyright ©2009
|