I've disassembled my 3.1 down to the block and I need to know how to test the lifters for proper function. Please Help!
:uhoh:

Were they noisey when the engine was running?

[
quote=maxwedge]Were they noisey when the engine was running?[/quote]
yes , the drivers side of the engine seemed to be the noisiest.

It is very difficult to bench test lifters, if some are collapsed/ noisey as you say then just replace them all, this assumes good oil pressure/oil condition and the engine is not sludged up or contaminated with coolent.

It is very difficult to bench test lifters, if some are collapsed/ noisey as you say then just replace them all, this assumes good oil pressure/oil condition and the engine is not sludged up or contaminated with coolent.


Thank you!